研究所概况
当前位置:首页  研究所概况  院士专家

中国工程院院士

英国皇家工程院院士

乌克兰工程科学院院士

英国剑桥大学丘吉尔学院院士

香港工程科学院院士及副院长

美国电机电子工程师学会特级会员 IEEE Fellow

英国工程技术学会资深会员 IET Fellow

香港工程师学会资深会员及前会长

世界电动车协会主席

亚太电动车协会主席

国际高等研究院院长

陈清泉教授出生于一个印尼企业家的家庭, 从小即受多国文化熏陶。1957年毕业于北京矿业学院(现中国矿业大学);1959年毕业于清华大学研究生;1982年获香港大学哲学博士;1992年获获乌克兰敖德萨理工大学荣誉科学技术博士;2008年获英国洛夫堡大学荣誉技术博士学位。1992年被甄选为美国电机电子工程师学会院士(IEEE Fellow), 以表彰其在电力拖动及电动车研究之杰出成就。1996年获选香港工程科学院院士;1997年这一年他获选英国皇家工程院院士、香港首位中国工程院院士和乌克兰工程科学院院士。

50年来他的经历几乎平均分配于学术、工业和专业服务,而且能使这三者密切联系,互相促进。他的工程生涯开始于1959年任大学助教。1976年任职于香港电灯公司为研究工程师。1976年至1980年任教于香港理工学院。1982年获聘为香港大学讲师,后升任为高级讲师、教授、讲座教授、1994 2000年任电机电子工程系系主任, 现为荣誉教授。陈教授还兼任世界各国著名大学客座教授,包括美国加州伯克利大学、麻省理工学院、英国剑桥大学丘吉尔学院、德国柏林工业大学、法国克罗诺贝尔理工大学、东京大学、武汉大学校长特别顾问等,并获选为美国电机电子工程师学会杰出讲师。1986创办国际电动车研究中心, 并于1990年共同创立世界电动车协会, 因此陈教授被誉为世界电动车三大权威之一。2001-2005年任中国第十个五年计划”863”重大科技专项评委。2003年起任第十届全国政协委员。2006年获邀任美国加州奥克兰市长特别工作小组顾问,起草关于2020年前实现世界上第一个城市不依赖汽油的法规。2009年被香港特区政府任命为推动使用电动车督导委员会成员。他还担任国际著名企业的高级科技顾问或独立董事,政府科技顾问等职。

陈教授于1988年获美国电机电子工程师学会优秀论文奖及加拿大阿尔干优秀科技奖。1996年获匈牙利电工技术学会优秀成就奖。2000年获英国电机工程师学会国际杰出学术演讲勋章。2001年被亚洲权威期刊《亚洲新闻》评选为亚洲最佳技术创新者。2003年被期刊Global View誉为“亚洲电动车之父”, 2006年又在印度荣获“电动汽车技术之祖“称号。2007年获美国汽车工程师学会环保交通卓越成就奖。2008年获颁“中国汽车工业杰出人物“。2010年获颁香港工程师学会最高荣誉金勋章。

陈教授活跃于国际学术专业团体,他是美国电机电子工程师学会院士、英国工程技术学会和香港工程师学会资深会员。担任20多个委员会委员、他担任世界电动车协会主席,香港工工程师学会1999/2000年度会长等。他担任多个国际学术会议的主席或应邀作主题演讲。

陈教授著有十一本书、三百多篇科技论文和十个专利。他应邀撰写的专著《现代电动车技术》由牛津大学出版社出版,使现代电动车学这一新兴交叉学科从理论到实践形成了一个完整的体系,该书被评论为认真总结了二十年的宝贵经验,具有权威性。他还担任多个国际学术期刊的主编或特约编辑、中国大百科全书第二版总编委、中国电气大典编委等。他每年为促进中国及国际间的科技交流穿梭于中国内地和美洲、欧洲及亚洲各国之间。2002年他倡议创办国际高等研究院, 促进国际学术交流并培育一流科学家。


Prof. C.C. Chan Publication List陈清泉院士论著目录


B: Books/Chapters 专著

P: Patents 专利

J: Refereed Journal Papers 国际学术期刊论文

K: Keynote/Invited Papers 国际会议主题论文和邀请论文

C: Conference Papers 国际会议论文

T: Technical/Consultancy Reports 技术报告和咨询报告


1-OV: Overviews (EV)

2-EV: Electrical vehicles

3-NM: Novel machines and electromagnetics

4-PM: Permanent magnet machines and drives

5-EC: Power electronics and controls


B1Editor, “Electrical Machines” ,Chinese Industry Publisher Vol. 1: 1st edition, August 1960, Publication No. K15165.0079. Vol. 2: 1st edition, September 1962, Publication No. K15165.1732.

北京矿业学院普通电工教研组编:《电机学》上册(北京:中国工业出版社,19608月)(统一书号K15165.0079

北京矿业学院普通电工教研组编:《电机学》下册(北京:中国工业出版社,19629月)(统一书号K15165.1732

b2Chief Editor (Wu Zhen-Chun, Yao Cheng-Shan, C.C. Chan): “Handbook of Mining Electrical Engineering”, Vol. 1 - Coal Industry Publisher, 1st edition, May 1960, Publication No. 15035.1165. Vol. 2 - Chinese Industry Publisher, 1st edition, September 1964, Publication No. K15165.2700. (Received Publisher’s Prize)

吴振春、姚承三、陈清泉审校:《煤矿电工手册》第一卷(北京:煤炭工业出版社,19605月)(统一书号15035.1165

吴振春、姚承三、陈清泉审校:《煤矿电工手册》第二卷(北京:中国工业出版社,19649月)(统一书号K15165.2700)(本书获出版社表彰)

b3Author of Chapter 3, 8 and 9,“Handbook of Electrical Engineering”,1st edition by Shanghai People's Publisher, September 1973. 2nd edition by Shanghai Science & Technology Publisher, April 1978, August 1990, June 1992, ISBN 7-5323-2116-9/TM-47. (First Group National Bestseller Award)

电工手册编写组:《电工手册》第一版(上海:上海人民出版社,19739月)。《电工手册》第二版(上海:上海科学技术出版社,19784月)。(ISBN 7-5323-21169/TM47)(陈清泉负责编写第389章)(本书被中国书刊发行协会评为第一批全国优秀畅销书)

b4Associate Editor of Chapter 8, “Power Electronics Technology and Applications 1993”, (Editor-in-Chief: Pierre A Thollot) IEEE Technology Updated Series, IEEE Technical Activities Board, 2003. ISBN 0-7803-08808-8.

b5C.C. Chan and K.T. Chau, “Modern Electric Vehicle Technology”, Oxford University Press,2001. ISBN 019-850416-0.

b6C C Chan and Y J Zhan : “Electric Vehicles - Green Transportation of the 21st Century”, National Key Books Series, Preface by National President, Tsing Hua University Press, June 2000 (in Chinese). ISBN 7-81029-938-7.

陈清泉、詹宜巨著:《21世纪的绿色交通工具——电动汽车》(北京:清华大学出版社、广州:暨南大学出版社,20006月)。(ISBN 7-81029-938-7)(本书列为国家重点图书系列)

b7陈清泉、蒋全著:《现代电动汽车及其工程哲学与关键技术》(高等教育出版社,20006月)(ISBN 7-04-008633-6)(本书为《中国科学技术前沿》中国工程院版源技术篇系列)

B8Antoni Szumanowski(波兰)原著、陈清泉、孙逢春编译:《混合动力电动汽车基础》(北京:北京理工大学出版社,200111月)(ISBN 7-81045-815-9

B9陈清泉、孙逢春、祝嘉光编著:《现代电动汽车技术》(北京:北京理工大学出版社,200211月)(ISBN 7-5640-0045-7

B10    C.C. Chan: “Electric Vehicles”, a Chapter in the theme of “Electrical Engineering”, Encyclopedia of Life Support System (EOLSS), UNESCO, 2004.

B11    Academician, Prof. CC Chan’s Selected Works “Modern Electric Vehicles, Electric Drives and Power Electronics”, China Machine Press, September, 2005. ISBN 7-111-17119.

    陈清泉著、诸自强主编:《陈清泉院士论文选集——现代电动汽车、电机驱动及电力电子技术》(北京:机械工业出版社,20057月)(ISBN 7-111-17119-5


p1    C.C. Chan and W.S. Leung:“Axial Field Shaded-Pole Hysteresis Motor”, UK Patent No. GB 2072451 (1981).

p2    C.C. Chan:“Ceiling Fan with Axial-Field Motor”, UK Patent No. 8040002 (1982).

p3    C.C. Chan and W.S. Leung:“A High-Frequency Axial-Field Inductor Alternator”, UK Patent No. GB 2100936 (1986).

p4    C.C. Chan:“Single-Phase Switched Reluctance Motor”, UKPatent No. GB 2157089 (1985).

p5    C.C. Chan:“Adjustable Flux Permanent Brushless DC Motor”,UK Patent No. GB 2284104 (1998).

p6    C.C. Chan:“A Permanent Magnet Brushless DC Motor”, UK Patent No. GB 2289991 (1998).

p7    C.C. Chan:“Improvement in a Permanent Magnet Hybrid Brushless DC Motor”, UK Patent No. GB 2291274 (1999).

P8    C.C. Chan: “Method for Battery Residual Capacity Estimation in Electric Vehicles”, UK Patent No. GB 0206316.2 (2003).

P9    C.C. Chan: “Electric Vehicle Battery Residual Capacity Estimation Method”, China Invention Patent No. 0214428.1 (2005).

P10    陈清泉:“电动汽车蓄电池剩余容量的估计方法”,中国发明专利号0214428.1200511


J01    4-PM W.S. Leung and C.C. Chan:“A New Design Approach for Axial-Field Electrical Machines” , IEEE Transactions on Power Apparatus and Systems, Vol. PAS-99, No. 4, July/August 1980, pp. 1679-1685.

J02    C.C. Chan:“Automatic Control of Mining Hoist System - Using Low Frequency Supply for Braking and Creeping”,Coal Industry, March 1965, pp. 7-20 (in Chinese).

J03    3-NM C.C. Chan:“Single-Phase Switched Reluctance Motors”,IEE Proceedings Part B, Vol. 134, No.1, January 1987, pp. 53-56.

J04    3-NM C.C. Chan:“Low-Cost Electronic Controlled Variable-Speed Reluctance Motor”,IEEE Transactions on Industrial Electronics, Vol. IE-34, No. 1, February 1987, pp. 95-100.

J05    W.S. Leung and C.C. Chan:“Test Equipment for Induction Motors”,International Journal of Electrical Engineering Education, Vol. 24, No. 1, 1987, pp. 57-64.

J06    2-EV C.C. Chan: “An Advanced AC Propulsion System for Electric Vehicles”, Electric Vehicle Developments (An International Publication), Vol. 6, No. 2, April 1987, pp. 67-69.

J07    4-PM C.C. Chan: “Axial-Field Electrical Machines”,IEEE Transactions on Energy Conversion, Vol. EC-2, No. 2, June 1987, pp. 294-300.

J08    2-EV C.C. Chan and W.C. Lo: “Control Strategy of PWM Inverter Drive System for Electric Vehicles”,IEEE Transaction on Industrial Electronics, Vol. IE-34, No. 4, November 1987, pp. 447-456.

J09    C.C. Chan: “Decoupling Control of Induction Motors”,Proceedings Chinese Society of Automation, September 1987, pp. 365-368. (Received Best Paper Award)

J10    5-EC C.C. Chan and J. Wu: “Robust High Performance Induction Motor Speed Control”,Proceedings Chinese Society of Electrical Engineering, November, 1988, pp. 201-206.

J11    C.C. Chan: “Variable-Speed Reluctance Motors”,Electrical Machinery Technology, No. 1, March 1989, pp. 33-37 (Translated to Chinese).

J12    C.C. Chan: “Design and Application of Axial-Field Electric Machines”,Electrical Machinery Technology, No. 3, September 1989, pp. 47-51 (Translated to Chinese).

J13    5-EC C.C. Chan, W.S. Leung and C.W. Ng: “Adaptive Decoupling Control of Induction Motor Drives”,IEEE Transactions on Industrial Electronics, Vol. IE-37, No. 1, February 1990, pp. 41-47. (Received the IEEE-IES Best Paper Award)

J14    C.C. Chan and K.T. Chau:“Computer Graphics Aided Design for an AdvancedElectric Motor”, IEE Journal on Computer Aided Engineering, Vol. 7, No. 3, June 1990, pp. 72-74.

J15    5-EC C.C. Chan and H.Q. Wang: “An Effective Method for Rotor Resistance Identification for High Performance Induction Motor Vector Control”,IEEE Transactions on Industrial Electronics, Vol. IE-37, No. 6, December 1990, pp.477-482.

J16    2-EV C.C. Chan and K.T. Chau: “A New PWM Algorithm for Battery-Source 3-Phase Inverters”,Journal of Electric Machines and Power Systems. Hemisphere Publishing Corp. Washington D.C. U.SA., No. 19, 1991, pp. 43-54.

J17    C.C. Chan and K.T. Chau:“Design of Electrical Machines by the Finite Element Method Using Distributed Computing”,International Journal of Computers in Industry, Elsevier, Vol. 17, No. 4, 1991, pp. 367-374.

J18    5-EC C.C. Chan and K.T. Chau, “A Fast and Exact Time-domain Simulation of Switched-mode Power Regulators”, IEEE Transactions on Industrial Electronics (TIE), Vol. 39, No. 4, August 1992, pp. 341-350.

J19    5-EC C.C. Chan and K.T. Chau, “A New Zero-voltage-switching DC/DC Boost Converter”, IEEE Transactions on Aerospace and Electronic Systems (TAES), Vol. 29, No. 1, January 1993, pp. 125-134.

J20    C.C. Chan, J.Z. Jiang, G.H. Chen and K.T. Chau, “Computer Simulation and Analysis of a New Polyphase Multipole Motor Drive”, IEEE Transactions on Industrial Electronics (TIE), Vol. 40, No. 6, December 1993, pp. 570-576.

J21    C.C. Chan, G.H. Chen, J.Z. Jiang and X.Y. Wang:“A Novel High Power Density Permanent Magnet Variable-Speed Motor”,IEEE Transactions on Energy Conversion, June 1993, Vol. 8, No. 2, pp.297-303.

J22    1-OV C.C. Chan: “An Overview of Electric Vehicle Technology”,Proceeding of IEEE, Vol. 81, No.9, September 1993, pp. 1201-1213. (Invited Paper, with Prolog from the Editor)

J23    C.C. Chan, J.Z Jiang and G.H. Chen: “Computer Simulation and Analysis of a New Polyphase Multipole Motor Drive”, IEEE Transactions on Industrial Electronics, Vol. 40, No. 6, December 1993, pp. 570-576.

J24    C.C. Chan, L.T. Yan, P.Z. Chen, Z.Z. Wang and K.T. Chau: “Analysis of Electromagnetic and Thermal Fields for Induction Motors During Starting”,IEEE PowerEngineering Review, Vol. 14, No. 3, March 1994, P.54.

J25    3-NM C.C. Chan, L.T. Yan, P.Z. Chen, Z.Z. Wang and K.T. Chau: “Analysis of Electromagnetic and Thermal Fields for Induction Motors During Starting”,IEEE Transactions on Energy Conversion, Vol. 9, No. 1, March 1994, pp. 53-60. (This paper is listed as the first reference of the “IEEE Guide for the Construction of Thermal Limit Curves for Squirrel Cage Induction Machines,”IEEE-P620, December 5, 1995)

J26    5-EC C.C. Chan and K.T. Chau: “Spectral Modelling of Switched-Mode Converters”, IEEE Transactions on Industrial Electronics, Vol. 41, No. 4, August 1994, pp. 215-230.

J27    4-PM C.C. Chan, J.Z. Jiang, G.H. Chen, X.Y. Wang and K.T. Chau: “A Novel Polyphase Multipole Square-Wave Permanent Magnet Motor Drive for Electric Vehicles”, IEEE Transactions on Industry Applications, Vol. 30, No. 5, September/October 1994, pp. 1258-1266.

J28    C.C. Chan, J.Z. Jiang, W. Xia and K.T. Chau: “Novel Wide Speed Range Control of Permanent Magnet Brushless Motor Drives”, IEEE Transactions on Power Electronics, Vol. 10, No. 5, September 1995, pp. 539-546.

J29    2-EV C.C. Chan and K. T. Chau: “An Advanced Permanent Magnet Motor Drive System for Battery-Powered Electric Vehicles”, IEEE Transactions on Vehicular Technology, Vol.45, No.1, February 1996, pp.1-9.

J30    C.C. Chan, K.T. Chau, J.Z. Jiang, W. Xia, M. Zhu and R. Zhang:“Novel Permanent Magnet Motor Drives for Electric Vehicles”,IEEE Transactions on Industrial Electronics, Special Section on Permanent Magnet Motor Drives, Vol. 43, No. 2, April 1996, pp331-339.

J31    C.C. Chan, J.Z. Jiang, W. Xia and K.T. Chau, “A Novel Wide Speed Range Permanent Magnet Brushless DC Motor Drive for Electric Vehicles”, International Journal of Electronics (IJE), Vol. 80, No. 2, April 1996, pp. 235-248.

J32    5-EC C.C. Chan and H.Q Wang: “A New Scheme of Sliding Mode Control for High Performance Induction Motor Drives”,IEE Proceedings on Electric Power Applications, Vol.143, No.3, May 1996, pp. 177-185.

J33    C.C. Chan:“Guest Editorial, Special Section on Electric Vehicle Technology”, IEEE Transactions on Industrial Electronics, Vol. 44, No.1, February 1997, pp. 1-2.

J34    1-OV C.C. Chan and K. T. Chau: “An Overview of Power Electronics in Electric Vehicles”, IEEE Transactions on Industrial Electronics, Special Section on Electric Vehicle Technology, Vol.44, No. 1, February 1997, pp. 3-13.

J35    1-OV C.C. Chan:“Electric Vehicle Development Strategy and Key Technology – An Overview”, Transactions of the Hong Kong Institution of Engineers, Vol. 4, No. 2 &3, 50th Anniversary, Special Issue, December 1997, pp. 60-70.

J36    Y.K. Cheung and C.C. Chan:“Editorial”, Transactions of the Hong Kong Institution of Engineers, Vol. 4, No. 2 & 3, 50th Anniversary Special Issue, December 1997, p.1.

J37    2-EV K.T. Chau, C.C. Chan and Y.S. Wong: “Advanced Power Electronic Drives for Electric Vehicles”,International Journal of Electromotion, Mediamira Science Publisher, Vol. 5, No. 2, April - June 1998, pp. 42-53.

J38    1-OV K.T. Chau and C.C. Chan: “Electric Vehicle Technology - A Timely Course for Electrical Engineering Students”, International Journal of Electrical Engineering Education, Vol. 35, July 1998, pp. 212-220.

J39    C.C. Chan, W. Xia, J.Z. Jiang, K.T. Chau and M.L. Zhu, “Permanent-magnet Brushless Drives”, IEEE Industry Applications Magazine (IAM), Vol. 4, No. 6, November/December 1998, pp. 16-22.

J40    5-EC C.C. Chan, K.T. Chau and Y. Li: “Analysis of Negative Spikes on DC-Link Current in Voltage-Source PWM Inverters”, International Journal of Electronics, Vol. 85, No.4, October 1998, pp. 534-544.

J41    5-EC K.T. Chau, J.M. Yao and C.C. Chan: “A New Soft-Switching Vector Control Approach for Resonant Snubber Inverters”, International Journal of Electronics (IJE), Vol. 86, No. 2, February 1999, pp. 101-115.

J42    5-EC K.T. Chau, T.W. Ching and C.C. Chan: “A New Two-quadrant Zero-voltage Transition Converter for DC Motor Drives”, International Journal of Electronics (IJE), Vol. 86, No. 2, February 1999, pp. 217-231.

J43    4-PM C.C. Chan, J.Z. Jiang, W. Xia, K.T. Chau and M. Zhu: “Optimal-Efficiency Control for Constant-Power Operation of Phase-Decoupling Permanent-Magnet Brushless Motor Drives”, IEEE Industry Applications Magazine, Vol.4, No. 6, November/December 1998, pp. 16-22.

J44    5-EC Y.J. Zhan, C.C. Chan and K.T. Chau: “A Novel Sliding Mode Observer for Indirect Position Sensing of Switched Reluctance Motor Drives”, IEEE Transactions on Industrial Electronics, Vol. 46, No. 2, April 1999, pp390-398.

J45    2-EV C.C. Chan: “Electric Vehicle Key Technology”, World Sci-Tech R & D, ISSN 1006-6055, February 1998, pp. 6-11.

J46    5-EC J.H. Chen, K.T. Chau and C.C. Chan: “Chaos in Voltage-Mode Controlled DC Drive Systems”, International Journal of Electronics, Vol.86, No. 7, July 1999, pp.857-874.

J47    4-PM K.T. Chau, M, Cheng and C.C.Chan: “Performance Analysis of 8/6 Pole Doubly Salient Permanent Magnet Motor”, International Journal of Electric Machines and Power Systems, Vol. 29, No.10, October 1999, pp. 1055-1067.

J48    1-OV K.T. Chau, Y.S.Wong and C.C. Chan: “An Overview of Energy Sources for Electric Vehicles”, International Journal of Energy Conversion and Management (ECM), Vol. 40, Iss. 10, July 1999, pp. 1021-1039.

J49    4-PM M. Cheng, K.T. Chau, C.C. Chan. E. Zhou and X. Huang, “Nonlinear Varying-network Magnetic Circuit Analysis for Doubly Salient Permanent Magnet Motors”, IEEE Transactions on Magnetics (TM), Vol. 36, No. 1, January 2000, pp. 339-348.

J50    5-EC J.H. Chen, K.T. Chau, and C.C. Chan, “Analysis of Chaos in Current-Mode Controlled DC drive Systems”, IEEE Transactions on Industrial Electronics (TIE), Vol. 47, No. 1, February 2000, pp. 67-76.

J51    4-PM M. Cheng, K.T. Chau, C.C. Chan, and E. Zhou, “Performance Analysis of Split-Winding Doubly Salient Permanent Magnet Motor for Wide Speed Operation”, International Journal of Electric Machines and Power Systems (EM&PS), Vol. 28, No. 3, March 2000, pp. 277-288.

J52    K.T. Chau, Y.S. Wong and C.C. Chan, “EVSIM –– APC-Based Simulation Tool for Electric Vehicle Technology Course”, International Journal of Electrical Engineering Education (IJEEE), Vol. 37, No. 2, April 2000, pp. 167-179.

J53    5-EC J.H. Chen, K.T. Chau, S.M. Siu and C.C. Chan, “Experimental Stabilization of Chaos in a Voltage-mode DC Drive System”, IEEE Transactions on Circuits and Systems - I: Fundamental Theory and Applications (TCS-I), Vol. 47, No. 7, July 2000, pp. 1093-1095.

J54    4-PM J. Gan, K.T. Chau, Y. Wang, C.C. Chan and J.Z. Jiang, “Design and Analysis of a New Permanent Magnet Brushless DC Machine”, IEEE Transactions on Magnetics (TM), Vol. 36, No. 5, September 2000, pp. 3353-3356.

J55    4-PM J. Gan, K.T. Chau, C.C. Chan and J.Z. Jiang, “A New Surface-inset, Permanent-magnet, Brushless DC Motor Drive for Electric Vehicles”, IEEE Transactions on Magnetics (TM), Vol. 36, No. 5, September 2000, pp. 3810-3818.

J56    5-EC W.C. Lo, C.C. Chan, Z.Q. Zhu, L. Xu, D. Howe and K.T. Chau, “Acoustic Noise Radiated by PWM-controlled Induction Machine Drives”, IEEE Transactions on Industrial Electronics (TIE), Vol. 47, No. 4, August 2000, pp. 880-889.

J57    3-NM Z.M. Zhao, M. Shuo, C.C.Chan, E.W.C. Lo, “A Novel Induction Machine Design Suitable for Inverter-Driven Variable Speed Systems”, IEEE Transactions on Energy Conversion, Vol.15, No.4, December 2000, pp. 413-420.

J58    3-NM C.C. Chan, Z.M. Zhao, S. Meng, E.W.C. Lo, “Strategy and Implementation for Design and Analysis of Induction Machines Supplied by Power Electronic Inverters”, IEEE Transactions on Industrial Electronics, Vol.48, No.6, December 2001, pp. 1272-1274.

J59    4-PM M. Cheng, K.T. Chau, and C.C. Chan, “Design and Analysis of a New Doubly Salient Permanent Magnet Motor”, IEEE Transactions on Magnetics (TM), Vol. 37, No. 4, July 2001, pp. 3012-3020.

J60    4-PM M. Cheng, K.T. Chau and C.C. Chan, “Static Characteristics of a New Doubly Salient Permanent Magnet Motor”, IEEE Transactions on Energy Conversion (TEC), Vol. 16, No. 1, March 2001, pp. 20-25.

J61    2-EV S.Z. Jiang, K.T. Chau and C.C. Chan, “Performance Analysis of a New Dual-Inverter Pole-Changing Induction Motor Drive for Electric Vehicles”, Electric Power Components and Systems (EPCS), Vol. 30, No.1, 2002, pp. 11-29.

J62    C.C. Chan: “The Role of Engineers in Changing Environment”, Asia Engineer, December 1999, pp.27-28

J63    C.C. Chan: “The Boundary of Engineering in a Changing Environment”, Hong Kong Engineer, January 2001, pp. 36-37

J64    C.C. Chan: Information Engineering  Creating the Future, Editorial, Computing and Control Engineering Journal, August 2001, pp147.

J65    3-NM Z.Q. Zhu, D. Howe, and C.C. Chan, “An Improved Analytical Model for Predicting the Magnetic Field Distribution in Brushless Permanent Magnet Motors”, IEEE Transactions on Magnetics (TM), Vol.38, No.1, 2002, pp.229-238.

J66    2-EV W.X. Shen, C.C. Chan, E.W.C. Lo and K.T. Chau, “Estimation of Battery Available Capacity under Variable Discharge Currents”, Journal of Power Sources (JPS), Vol. 103, No. 2, January 2002, pp. 180-187.

J67    2-EV S.Z. Jiang, K.T. Chau and C.C. Chan, “Performance Analysis of a New Dual-inverter Pole-changing Induction Motor Drive for Electric Vehicles”, Electric Power Components and Systems (EPCS), Vol. 30, No.1, January 2002, pp. 11-29.

J68    1-OV C.C. Chan: “The State of the Art of Electric and Hybrid Vehicles”, Invited Paper, Proceedings of IEEE, Vol.90, No.2, February 2002, pp247-275.

J69    5-EC J.H. Chen, K.T. Chau, C.C. Chan and Q. Jiang, “Subharmonics and Chaos in Switched Reluctance Motor Drives”, IEEE Transactions on Energy Conversion (TEC), Vol. 17, No. 1, March 2002, pp. 73-78.

J70    4-PM Y. Wang, K.T. Chau, C.C. Chan, and J.Z. Jiang, “Transient Analysis of a New Outer-rotor Permanent-magnet Brushless DC Drive Using Circuit-field-torque Time-stepping Finite Element Method”, IEEE Transactions on Magnetics (TM), Vol. 38, No. 2, March 2002, pp. 1297-1300.

J71    2-EV W.X. Shen, C.C. Chan, E.W.C. Lo and K.T. Chau, “A New Battery Available Capacity Indicator for Electric Vehicles Using Neural Network”, Energy Conversion and Management (ECM), Vol. 43, No. 6, April 2002, pp. 817-826.

J72    2-EV W.X. Shen, C.C. Chan, E.W.C. Lo and K.T. Chau, “Adaptive Neuro-Fuzzy Modeling of Battery Residual Capacity for Electric Vehicles”, IEEE Transactions on Industrial Electronics (TIE), Vol. 49, No. 3, June 2002, pp. 677-684.

J73    4-PM K.T. Chau, M. Cheng and C.C. Chan, “Nonlinear Magnetic Circuit Analysis for a Novel Stator-doubly-fed Doubly-salient Machine”, IEEE Transactions on Magnetics (TM), Vol. 38, No. 5, September 2002, pp. 2382-2384.

J74    4-PM Y. Wang, K.T. Chau, J. Gan, C.C. Chan and J.Z. Jiang, “Design and Analysis of a New Multiphase Polygonal-winding Permanent-magnet Brushless DC Machine”, IEEE Transactions on Magnetics (TM), Vol. 38, No. 5, September 2002, pp. 3258-3260.

J75    4-PM M. Cheng, K.T. Chau and C.C. Chan, “New Split-winding Doubly Salient Permanent Magnet Motor Drive”, IEEE Transactions on Aerospace and Electronic Systems (TAES), Vol. 39, No. 1, January 2003, pp. 202-210.

J76    2-EV Y.S. Wong, K.T. Chau and C.C. Chan, “Optimal Subsidizing Policy to Promote Electric Vehicles in Hong Kong”, Journal of Asian Electric Vehicles (JAEV), Vol. 1, No. 2, December 2003, pp. 479-482.

J77    5-EC S.Z. Jiang, K.T. Chau and C.C. Chan, “Spectral Analysis of a New Six-phase Pole-changing Induction Motor Drive for Electric Vehicles”, IEEE Transactions on Industrial Electronics (TIE), Vol. 50, No. 1, February 2003, pp. 123-131.

J78    2-EV K.T. Chau, K.C. Wu, C.C. Chan and W.X. Shen, “A New Battery Capacity Indicator for Nickel-metal Hydride Battery Powered Electric Vehicles Using Adaptive Neuro-fuzzy Inference System”,Energy Conversion and Management (ECM), Vol. 44, No. 13, August 2003, pp. 2059-2071.

J79    5-EC K.T. Chau, S.W. Chung and C.C. Chan, “Neuro-fuzzy Speed Tracking Control of Traveling-wave Ultrasonic Motor Drives Using Direct Pulse Width Modulation”,IEEE Transactions on Industry Applications (TIA), Vol. 39, No. 4, July/August 2003, pp. 1061-1069.

J80    5-EC M. Cheng, K.T. Chau, C.C. Chan and Q. Sun, “Control and Operation of a New 8/6-pole Doubly Salient Permanent Magnet Motor Drive”,IEEE Transactions on Industry Applications (TIA), September/October 2003, pp. 1363-1371.

J81    2-EV S.Z. Jiang, K.T. Chau and C.C. Chan, “Harmonic Reduction in DC-link Current of a Dual-inverter Pole-changing Induction Motor Drive for Electric Vehicles”, Electric Power Components and Systems (EPCS), Vol. 31, No. 11, November2003, pp. 1063-1081.

J82    M. Cheng, K.T. Chau, C.C. Chan and Q. Sun, “Control and Operation of a New 8/6-pole Doubly Salient Permanent-magnet Motor Drive”, IEEE Transactions on Industry Applications, Vol. 39, No. 5, September/October 2003, pp.1363 – 1371.

J83    2-EV K.T. Chau, K.C. Wu and C.C. Chan, “A New Battery Capacity Indicator for Lithium-ion Battery Powered Electric Vehicles Using Adaptive Neuro-fuzzy Inference System”,Energy Conversion and Management (ECM), Vol. 45, No. 11-12, July 2004, pp. 1681-1692.

J84    1-OV C.C. Chan, and Y. S. Wong, “Recent advances in electric vehicles”, IEEE Power and Energy Magazine, November/December 2004, pp.2-12.

J85    C.C. Chan and Y.S. Wong, “Electric Vehicles Charge Forward”, IEEE Power and Energy Magazine, November/December 2004, pp.24-33.

J86    M.S.W. Chan, K.T. Chau and C.C. Chan, “Design and Implementation of Neural Network Based Capacity Indicator for Lithium-ion Battery,” Journal of Asian Electric Vehicles (JAEV), Vol. 2, No. 2, December 2004, pp. 627-632.

J87    W.X. Shen, K.T. Chau, C.C. Chan and E.W.C. Lo, “Neural Network-based Residual Capacity Indicator for Nickel-metal Hydride Batteries in Electric Vehicles”, IEEE Transactions on Vehicular Technology, Vol. 54, No. 5, September 2005, pp. 1705 – 1712.

J88    M.S.W. Chan, K.T. Chau and C.C. Chan, “Effective Charging Method for Ultracapacitors,” Journal of Asian Electric Vehicles (JAEV), Vol. 3, No. 2, December 2005, pp. 771-776.

J89    Y.S. Wong, K.T. Chau and C.C. Chan, “Load Forecasting of Hybrid Electric Vehicles under Real Time Pricing,” Journal of Asian Electric Vehicles (JAEV), Vol. 3, No. 2, December 2005, pp. 815-818.

J90    Yuan Cheng, Shumei Cui, Liwei Song and C.C. Chan: “The Study of the Operation Modes and Electromehanical Converter for Automobiles”, IEEE Transactions on Magnetic.

J91    张慧、刘开培、Braun M、陈清泉:〈基于新型优化脉宽调制方法在大功率逆变器的应用〉,《电工技术学报》,20066月(216期),页1722

    Hui Zhang, K.P. Liu, M. Braun, C.C. Chan: “ Novel Partly Unsymmetrical Optimal PWM Technique for High Power Inverters”, Transactions of China Electrotechnical Society, Vol. 21, No. 6, June 2006, pp 17-22.

J92    崔淑梅、程远、陈清泉:〈先进汽车电气变速器〉,《电工技术学报》,20068月(218期)。

    Shumei Cui, Yuan Cheng and C.C. Chan: “An Advanced Electric Variable Transmission”, Transactions of China Electrotechnical Society, Vol. 21, No.8, August 2006.

J93    张慧、刘开培、Braun M、陈清泉:〈基于PWM低开关频率选择性谐波控制方程组的实时算法研究〉,《中国电机工程学报》,200611月(2624期),页2428

    Hui Zhang, Kaipei Liu, Michael Braun, C.C Chan: “Study of the algorithm of real-time solution of selective harmonic controlling equations for PWM with low switching frequency”, Proceeding of the Chinese Society for Electrical Engineering, Vol 26, No.24, November 2006, pp 24-28.

J94    Y.S. Wong, K.T. Chau and C.C. Chan, “Battery Sizing for Plug-in Hybrid Electric Vehicles,” Journal of Asian Electric Vehicles (JAEV), Vol. 4, No. 2, December 2006, pp. 899-904.

J95    M.S.W. Chan, K.T. Chau and C.C. Chan, “A New Switched-capacitor Inverter for Electric Vehicles,” Journal of Asian Electric Vehicles (JAEV), Vol. 4, No. 2, December 2006, pp. 905-909.

J96    C.C. Chan, “The State of the Art of Electric, Hybrid and Fuel Cell Vehicles”, Proceedings of IEEE, Special Issue on Electric, Hybrid and Fuel Cell Vehicles, April 2007. pp 704 – 718.

J97    C.C. Chan, “Guest Editorial – Scanning the Issue”, Proceedings of IEEE, Special Issue on Electric, Hybrid and Fuel Cell Vehicles, April 2007. pp 703.

J98    K.T. Chau and C.C. Chan, “Emerging Energy-Efficient Technologies for Hybrid Electric Vehicles”, Proceedings of IEEE, Special Issue on Electric, Hybrid and Fuel Cell Vehicles, April 2007.

J99    K.T. Chau, C.C. Chan, Chuanhua Liu, “Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles”, IEEE Transactions on Industrial Electronics, Vol. 55, No. 6, June 2008, pp2246 – 2257.

J100    X. Zhang, K.T. Chau and C.C. Chan, “Overview of thermoelectric generation for hybrid vehicles,” Journal of Asian Electric Vehicles, vol. 6, no. 2, December 2008, pp. 1119-1124.

J101    X. Zhang, K.T. Chau and C.C. Chan, “Design and implementation of a thermoelectric-photovoltaic hybrid energy source for hybrid electric vehicles,” World Electric Vehicle Journal, vol. 3, December 2009, pp. 1-11.

J102    Li Zhu, S. Z. Jiang, Z. Q. Zhu and C. C. Chan, “Analytical methods for minimizing cogging torque in permanent-magnet machines”, IEEE Transactions on Magnetics, vol. 45, no. 4, pp. 2023-2031, April 2009.

J103    Li Zhu, S. Z. Jiang, Z. Q. Zhu and C. C. Chan, “Analytical modeling of open-circuit airgap field distributions in multi-segment and multilayer interior permanent magnet machines”, IEEE Transactions on

Magnetics, 2009, vol. 45, no. 8, pp. 3121-3130, August, 2009.

J104    X. Zhang, K.T. Chau and C.C. Chan, “Overview of power networks in hybrid electric vehicles,” Journal of Asian Electric Vehicles, vol. 8, no. 1, June 2010, pp. 1371-1378.

J105    Li Zhu, S. Z. Jiang, J. Z. Jiang, Z. Q. Zhu and C. C. Chan, “A New Simplex Wave Winding Permanent-Magnet Brushless DC Machine”, IEEE Trans. on Magnetics, vol. 47., no. 1, pp. 252-259, January, 2011.

J106    Li Zhu, S. Z. Jiang, J. Z. Jiang, Z. Q. Zhu and C. C. Chan,Optimal slot opening in permanent magnet machines for minimum cogging torque”, Electrical Review, vol. 87., no. 3, pp. 315-319, March, 2011.

K1    C.C. Chan: “Electric Vehicle Development in Asia Pacific”, Proceedings 10th International Electric Vehicle Symposium, December 1990, pp. 6-23. (This is a keynote address as the General Chairman at the opening plenary session of the Symposium)

K2    C.C. Chan and K.T. Chau: “Electric Vehicle Technology - An Overview of Present Status and Future Trends”, Keynote Address at Opening Plenary Session, Proceedings 11th International Electric Vehicle Symposium, Florence, Italy, September 1992, Paper No. 1.02, pp.­1-12.

K3    C.C. Chan: “Power Electronics Challenges in Electric Vehicles”, Proceedings IEEE International Conference on Industrial Electronics, Control and Instrumentation, IECON 93, November 1993, pp. 701-706. (Invited Paper)

K4    C.C. Chan: “Present Status and Future Trends of Electric Vehicles”,Proceedings IEE Advances in Power System Control, Operation and Management (APSCOM 93), December 1993, pp. 455-469. (Invited paper)

K5    1-OV C.C. Chan: “Electric Vehicles Challenges and Opportunities in Asia Pacific”, Invited Plenary Session Speaker, Proceedings 12th International Electric Vehicle Symposium, California, U.S.A., December 1994, pp. 1-9.

K6    C.C. Chan and K. T. Chau: “Challenges of Electric Vehicle Technology”,Keynote Address, Proceedings International Conference on Electrical Machines, Hangzhou, China, September 1995, pp.34-41.

K7    C.C.Chan:“The Future of Clean and Energy Efficient Urban Transportation - Electric Vehicles”, Keynote Paper, International Symposium on Sustainable Energy Development in Asia, May 8-10, 1996, pp. 1-12.

K8    C.C. Chan: “Overview of Electric Vehicles - Clean and Energy Efficient Urban Transportation”, Keynote Paper, Proceedings of the 7th International Power Electronics & Motion Control Conference (PEMC'96), Vol. I, September 1996, pp. k.7-15.

K9    C.C. Chan: “Electric Vehicle Development Strategy in Asia Pacific”, Keynote Address at Opening Session, 1996 Beijing International Presentation Seminar Exhibition on Electric Vehicles & Substitutional Fuel Vehicles Technology, December 1996.

K10    C.C. Chan: “Key Technology of Electric Vehicle Propulsion”, 1996 Beijing International Presentation Seminar Exhibition on Electric Vehicles & Substitutional Fuel Vehicles Technology, December 1996. (Invited Paper)

K11    C.C. Chan: “Key Technology of Motor Drives for Electric Vehicles”, Keynote Paper, Proceedings PCIM97, International Conference for Power Conversion Drives and Intelligent Motion, October 1997, Hong Kong, pp. 387-398.

K12    C.C. Chan: “Power Electronics and Electric Vehicles”, Invited Plenary Paper, Proceedings 2nd International Power Electronics and Motion Control Conference, November 1997, pp. 21-28.

K13    1-OV C.C.Chan: “Power Electronics in China – State-of-the-Art and Future Trends”, Keynote Paper,Proceedings of PCIM98, the International Forum at Power Electronics Conference, October 14-15, Hong Kong, 1998, pp.15-27.

K14    C.C.Chan: “Engineering Philosophy of Electric Vehicle,” Invited Special Session Paper, Proceedings of IEEE International Electric Machines and Drives Conference (IEMDC’99), Seattle, USA, May 1999, pp.255-257.

K15    C.C.Chan: “Electric Vehicles and Innovative Business”, Keynote Paper, International Forum on Venture Capital eBeijing 2000, Beijing, China, April 3-4, 2000, pp1-5.

K16    C.C. Chan: “The Challenges of Electrical Engineering in New Era”, Keynote Speech, International Conference on Electrical Engineering 2000 (ICEE 2000), Kitakyushu, Japan, July 24-28, 2000, pp. 1-6.

K17    C.C. Chan: “10th Anniversary of World Electric Vehicle Association and Global EV Development”, Closing Keynote Address, 17th International Electric Vehicle Symposium, Montreal, Canada, October 15-18, 2000.

K18    C.C. Chan: “Electric Vehicles: A Clean and Efficient Alternative Urban Transportation for the 21st Century”, Invited Speech, International Congress on Engineering and Technology Sciences, Energy Session, Beijing, October, 2000.

K19    C.C. Chan: The Role of Engineers in Changing Environment  Innovation is the Driver in New Era, Keynote Address, IEEE International Conference on Management of Innovation and Technology, Singapore, November 12-15, 2000.

K20    C.C. Chan: “Modern Electric Vehicles : Clean, Efficient and Sustainable Transportation Means in the 21st Century”, Keynote Address, First International Conference on Mechanical Engineering, Shanghai, China, November 20-22, 2000.

K21    C.C. Chan: “The Challenges of Electrical Engineers in the 21st Century”, Keynote Speech, International Conference on Electrical Engineering (ICEE 2001), Xi-an, China, July 2001.

K22    C.C. Chan: “The Challenges of Electrical Engineers in the 21st Century”, Keynote speech, International Conference on Electrical Machines Systems, Shenyang, August 2001.

K23    C.C. Chan: “High-tech and Capital Market”, Invited Speech, International Symposium on High-tech and Capital Market, Wuhan, October 2001.

K24    C.C. Chan: “Present Status and Future Trends of Electric Vehicles”, Keynote Speech, First Asian Electric Vehicles Conference (AEVC-1), Beijing, November 2001.

K25    C.C. Chan: “The Challenges and Opportunity of Electric Vehicles in the New Century”, Keynote Speech, Second Asian Electric Vehicles Conference (AEVC-2), Osaka, October 2002.

K26    C.C. Chan: “The Challenges and Opportunity of New Century: Information Technology and Capital Market”, Invited Speech, International Forum on Information Technology, Jinan, China, October 2002.

K27    C.C. Chan: “The Challenges and Opportunity of New Century: Clean and Efficient Electric Vehicles”, Keynote Speech, IEEE Region 10 Conference (TENCON), Beijing, October 2002.

K28    C.C. Chan: “The Challenges and Opportunity of New Century: Fuel Cells”, Invited Speech, Sino-German Symposium on Fuel Cells, Dalian, October 2002.

K29    C.C. Chan: “Electric Vehicles Development in China”, Invited Speech, Electric Transportation Industry Conference, Florida, December 2002.

K30    C.C. Chan: “World Class University, High Technology and Capital Market”, Invited Speech, China Association of Science and Technology (CAST) Annual Meeting, Shenyang, September, 2003.

K31    C.C. Chan: “Clean, Efficient and Intelligent Electric Vehicles”, Keynote Speech, International Conference on Electric Machines and Systems”, Beijing, November, 2003.

K32    C.C. Chan: “Challenges of Electric Vehicles”, Invited Speech, Taipei Power Forum, December 2003.

K33    C.C. Chan: “Challenges of Electric Vehicles: Clean Transportation Means for the 21st Century”, Invited Speech, International Forum and Exhibition of Environment Protection Automobiles, Haikou, Hainan Island, China, February 2004.

K34    C.C. Chan: “Present Status and Future Trends of Electric Vehicles”, Keynote Address, Third Asian Electric Vehicles Conference”, Seoul, Korea, March 2004.

K35    C.C. Chan: “The Challenges and Opportunity of Electric Vehicles in the New Century”, Invited Speech, China International Battery Forum, Beijing, April 2004.

K36    C.C. Chan: “Challenges and Opportunity of Electric Vehicles and Their Requirement for Batteries”, Invited Speech, Euroforum: Batteries 2004, Paris, June 2004.

K37    C.C. Chan: “Recent Advances in Global Electric Vehicles”, Keynote Speech, International Conference on Electric Engineering (ICEE 2004), Sapporo, July 2004.

K38    C.C. Chan: “The State of the Art of Electric Vehicles Technology”, Keynote Speech, International Conference on Power Electronics and Motion Controls (IPEMC 2004), Xi-an, China, August, 2004.

K39    C.C. Chan: “The State of the Art of Electric Vehicles”, Invited Speech, World Engineers’ Convention (WEC 2004), Shanghai, November 2004.

K40    C.C. Chan: “The Challenges of Industrial Ecology in the New Century”, Invited Speech, Word Engineers’ Convention (WEC 2004), Shanghai, November 2004.

K41    1-OV C.C. Chan: “Industrial Ecology”, Invited Speech, China Association of Science and Technology Annual Meeting 2004, Haikou, Hainan Island, China, November 2004.

K42    C.C. Chan: “Energy Development Strategy and Industrial Ecology”, Shanghai Forum, May 17-17, 2005.

K43    C.C. Chan: “Energy Development Strategy, Industrial Ecology and Power Grid Interconnection in Northeast Asia”, International Conference on Electrical Engineering (ICEE 2005), Kunming, China, July 11 -13, 2005.

K44    C.C. Chan: “The Challenge of Sustainable Mobility”, IEEE Vehicles Power and Propulsion Conference (VPPC 2005), Chicago, U.S.A., August 7-9, 2005.

K45    C.C. Chan: “Recycle Economy & Industrial Ecology”, China Association of Science and Technology Annual Meeting 2005, Urumuqi, China, August 20 -22, 2005.

K46    C.C. Chan: “Energy Development Strategy, Industrial Ecology and Challenges to Electric Machines Systems”, International Conference on Electrical Machines & Systems (ICEMS 2005), Nanjing, China, September 27 -29, 2005.

K47    C.C. Chan: “International Conference on Cycle Economy & Industrial Ecology”, Wuhan, China, October 17-18, 2005.

K48    C.C. Chan: “The Challenges of Sustainable Mobility - Clean, Efficient and Intelligent Vehicles”, Fourth Asian Electric Vehicles Conference (AEVC-4), Osaka, Japan, November 26 -28, 2005.

K49    C.C. Chan and F.C. Chan: “Sustainability of Electricity and Its Lighting Applications”, Proceedings of International Conference on Electrical Engineering ICEE-2006, July 9-13, 2006, Yong Pyong, Korea, CD ROM.

K50    C.C. Chan: “Sustainable Energy and Mobility, and Challenges to Power Electronics”,

Proceedings of International Power Electronics and Motion Control Conference, August 14-16, 2006, Shanghai, CD ROM.

K51    C.C. Chan: “Global Sustainable Mobility and EV/HEV/FCEV Development in China & Japan”, Proceedings of IEEE Vehicle Power and Propulsion Conference, September 6-8, 2006, Windsor, U.K. CD ROM.

K52    陈清泉:〈可持续交通的挑战和轻型电动汽车〉,《中国轻型电动汽车高峰论坛论文集》,中国无锡,2006107日,页12

    C.C. Chan: “Challenges of Sustainable Mobility and Light Electric Vehicles”, Proceedings of China Light Electric Vehicles Summit Forum, Wuxi, China, October 7, 2006, pp. 1-2.

K53    陈清泉:〈可持续交通的挑战和小型电机〉,《国际小型电机论坛论文集》,中国上海,20061115日,页14

    C.C. Chan, “Challenges of Sustainable Mobility and Small Motors”, Proceedings International Forum on Small Motors, Shanghai, China, November 15, 2006, pp. 1-4.

K54    C.C. Chan: “The State of the Art of Electric, Hybrid and Fuel Cell  Vehicles”, IEEE International Conference on Electric and Hybrid  Vehicles, Pune, India, December 18-20, 2006

K55    C.C. Chan: “Approach to Independent to Oil”, Proceedings of Shanghai Forum, Energy Panel, May 25 -27, 2007, Shanghai, China.


K56    C.C. Chan: “Philosophy of Engineering and Electric Hybrid Vehicle  Technology”, Proceedings of IEEE Vehicle Power and Propulsion  Conference, September 10 -12, 2007, Arlington, Texas, U.S.A. CD ROM

K57    C.C. Chan: “Philosophy of Engineering and Challenges of Engineering  Education”, Proceedings of International Conference on Electrical  Engineering ICEE-2008, July 7 – 9, 2008, Okinawa, Japan.

K58    Z.Q. Zhu and C.C. Chan: “Electrical Machine Topologies and Technologies  for Electric, Hybrid and Fuel Cell Vehicles”, Proceedings of IEEE  Vehicle Power and Propulsion Conference, September 3 -5, 2008, Harbin,  China.

K59    C.C. Chan, Keyu Chen and Alain Bouscayrol, “Philosophy of Engineering  and Modelling of Electric Machine Drives, Proceedings of International  Conference on Electrical Machines and Systems (ICEMS 2008), October 17  -20, 2008, Wuhan, China.

C1    W.S. Leung and C.C. Chan: “Axial-Field Alternators for Hydro-Electric Power Generation”, CEPSI Proceedings, December 1978, A16, pp. 1-2.

C2    W.S. Leung and C.C. Chan: “An Axial-Field Alternator with a Yokeless Armature Core”,CEPSI Proceedings, December 1980, G14, pp. 1-8.

C3    C.C. Chan: “Single-Phase Axial-Field Motor for Ceiling Fan Drives”, Proceedingsof Electrical Machines for Special Purposes, CNR Italy, Vol. 1, September 1981, pp. 63-71.

C4    W.S. Leung, C.C. Chan and C.W. Yu: “An Axial-Field Inductor Alternator”,Proceedings of Electrical Machines for Special Purposes, CNR Italy, Vol. 1, September 1981, pp. 73-88.

C5    C.C. Chan: “Analysis of Airgap Permanence and Core Losses in Axial-Field Inductor Alternator”, ICEM Proceedings, Vol. 1, GT2/11, September 1982, pp. 1-3.

C6    C.C. Chan: “A Review on the Recent Development of Electric Vehicles and Its Impact on Power Systems”, CEPSI Proceedings, 2/43, November 1982, pp. 1-13.

C7    C.C. Chan:“Axial-Field Electrical Machines and Their Applications”, IEEE Proceedings MELECON, Vol. 2, D6.12, May 1983, pp. 1-4.

C8    C.C. Chan, W.S. Leung and B.W. William: “An Advanced AC Drive System for Electric Vehicles”,ICEM Proceedings, Vol. 3, September 1984, pp. 831-834.

C9    C.C. Chan and W.C. Lo: “PWM Power Transistorized Inverter Drive System for Electric Vehicles”, Proceedings IEEE- IECON 84, Vol. 1, October 1984, pp. 283-287.

C10    C.C. Chan and W.C. Lo: “Control Strategy of PWM Inverter Drive System for Electric Vehicles”,Proceedings IEEE-IECON 85, Vol. 2, November 1985, pp. 477-482.

C11    C.C. Chan: “Axial Field Electrical Machines - Design and Applications”,IEEE Power Engineering Society Summer Meeting 1986, Paper No. SM489-9, pp. 1-7.

C12    W.S. Leung and C.C. Chan: “A Data-Acquisition System for Transient Motor Operation”, Proceedings Society of Instrumentation and Control Engineers, Japan, (SICE), July 1986, pp. 947-950.

C13    C.C. Chan and W.C. Lo: “An Electric Vehicle with High Performance Inverter,Controller and Battery Prediction”,Proceedings Eighth International Electric Vehicle Symposium, Washington D.C., October 1986, pp. 496-502.

C14    C.C. Chan and C.S. Chang: “Electric Vehicle Development and Its Impact in Utilities”, Proceedings 6th Conference on Power Supply Industry, November 1986, Vol. 4, paper No. 4.21A, pp. 1-21.

C15    C.C. Chan: “Pacific Basin Electric Vehicle Developments”, Electric Vehicle Progress, New York, Vol. 9, No. 6, March 1987, pp. 6-7.

C16    C.C. Chan and W.A. Adams: “Report on Electric Vehicles Activities in Asia”, Electric Propulsion, Vol. 3, No. 2, June 1988, pp. 4-6.

C17    C.C. Chan: “Adaptive Induction Motor Drive System for Electric Vehicles”, Proceedings 2nd International Conference on Electric Drives, Romania, September 1988, Paper No. D.5, pp. 1-14.

C18    C.C.Chan:“Transportation Alternatives”,Proceedings International Renewable Energy Conference, Hawaii, September 1988, pp. 283-290.

C19    C.C. Chan, C.W. Ng and W.S. Leung: “Adaptive Decoupling Control of Induction Motor Drives”, Proceedings IEEE - IECON 88, October 1988, pp. 755-760.

C20    C.C. Chan, J. Wu and T.W. Chan: “Digital Simulation of PWM Inverter -Induction Motor Drive System for Electric Vehicles”,Proceedings IEEE - IECON 88, October 1988, pp. 804-809.

C21    2-EV C.C. Chan and C.W. Ng:“Adaptive AC Propulsion System for Electric Vehicles”,Proceedings 9th International Electric Vehicle Symposium, Toronto, November 1988, Paper No. EVS88-029, pp. 1-11. (Received the Alcan Award for Technical Excellence)

C22    C.C. Chan and K.C. Chu: “Intelligent Battery Management System”, Proceedings9th International Electric Vehicle Symposium, Toronto, Nov. 1988, Paper No. EVS88-052, pp.1-8.

C23    C.C. Chan, R.P. Yao and P.Z. Chen: “Electromagnetic Forces on End Windings of Turbine Generators”, Proceedings of International Conference on Electric Machines, ICEM 90, MIT, USA, August 1990, pp. 1131-1135.

C24    C.C. Chan and K.T. Chau: “A Novel PWM Algorithm for Single-Chip Microcomputer Based 3-Phase Inverter”, Proceedings of 6th International Conference on Power Electronics and Motion Control, Budapest, October 1990, pp. 445-449.

C25    3-NM C.C. Chan and K.T. Chau: “A New Permanent Magnet Motor Drive for Mini Electric Vehicles”, Proceedings of 10th International Electric Vehicle Symposium, December 1990, pp. 165-174.

C26    C.C. Chan and K.C. Chu: “A Microprocessor-based Intelligent Battery Charger for Electric Vehicle Lead Acid Batteries”, Proceedings of 10th International Electric VehicleSymposium, December 1990, pp. 456-466.

C27    C.C. Chan and K.T. Chau: “Advanced AC Propulsion System for Electric Vehicles”, Proceedings 24th ISATA International Symposium on Automotive Technology and Automation, Florence Italy, May 20-24, 1991. Paper No. 910607, pp. 119-124.

C28    C.C. Chan: “International Energy Issues: Energy Efficiency, Economy and Environment”, Proceeding Fourth Chinese National Assembly for Science and Technology, Beijing, May1991.

C29    C.C. Chan and K.C. Chu: “Comparisons of Energy Mixes and Their Environmental Impact in Road Transportation”, Proceedings World Energy Council Energy Forum, Sydney, June 2-5, 1991, pp. 284-295.

C30    F.O. Zhou and C.C. Chan: “A Knowledge Synthesis Approach to Control Systems Design”, Proceedings IFAC Symposium on CAD in Control Systems, U.K., July 15-17,1991, pp. 161-166.

C31    F.O. Zhou and C.C. Chan: “Resolution Control: One Kind of Knowledge Control”,Proceedings IFAC Symposium on Robotic Control, Vienna, Austria, September 16-18, 1991.

C32    C.C. Chan and K.T. Chau: “Analysis of Quasi-Resonant Converters by Using Finite Element Method”, Proceedings IEEE - IECON 91, October 1991, pp.354-359.

C33    C.C. Chan and S.L. Ho: “Simulation of Rotating Magneto-Motive Force in AC Machines”, Proceedings International Conference on Simulation in Engineering Education, Newport Beach, California, January 1992.

C34    C.C. Chan and K.T. Chau: “Time-Domain Simulation of Class-E DC/DC Converters by Using Finite Element Method”, Proceedings IEEE International Symposium on Industrial Electronics, May 1992, pp. 685-689.

C35    C.C. Chan, J.Z. Jiang, G.H. Chen and X.Y. Wang: “A Novel High Power Density Permanent Magnet Variable-Speed Motor”, IEEE Power Engineering Society Summer Meeting, Seattle, U.S.A., July 1992. Paper No. 92SM569-4EC, pp. 1-7.

C36    1-OV C.C. Chan and K.T. Chau: “Electric Vehicle Technology - An Overview of Present Status and Future Trends”, Proceedings of 11th International Electric Vehicle Symposium (EVS-11), Florence, Italy, September 1992, No. 1.02, pp. 1-12.

C37    C.C. Chan, J.Z. Jiang, G.H. Chen, X.Y. Wang and K.T. Chau: “A Novel High Power Density Permanent Magnet Motor Drive for Electric Vehicles”, Proceedings 11th Intentional Electric Vehicle Symposium, Florence, Italy, September 1992, Paper No. 8.06, pp. 1-­12.

C38    C. C. Chan, A. Tzang, L. Fleming and K.C. Chu:“Energy Saving andCarbonDioxide Mission Reduction by Electric Vehicles in the U.S.A. and Hong Kong”, Proceedings 11th International Electric Vehicle Symposium, Florence, Italy, September 1992, Paper No. 3.03, pp. 1-12.

C39    C.C. Chan and K.T. Chau: “Non-Linear Modeling of Pulse Width Modulated and Quasi Resonant Converters”, Proceedings IEEE Conference on Industrial Electronics IECON 92, San Diego, U.S.A., November 1992, pp. 229-234.

C40    C.C. Chan, L.T. Yan, P.Z. Chen, Z.Z. Wang and K.T. Chau: “Analysis of Electromagnetic and Thermal Fields for Induction Motor during Starting”, IEEE Power Engineering Society Winter Meeting, Columbus, U.S.A., January 1993, Paper No. 93WM 013-3EC, pp. 1-6.

C41    C.C. Chan, J.Z. Jiang, G. H. Chen, X.Y. Wang and K.T. Chau: “A Novel Polyphase Multipole Square-Wave Permanent Magnet Motor Drive for Electric Vehicles”, Proceedings IEEE 8th Applied Power Electronic Conference, San Diego, U.S.A., March 1993, pp. 315-­321.

C42    C. C. Chan: “Energy Saving by Penetration of Electric Vehicles in the U. S. A. and HongKong”, Proceedings Symposium on Perspectives of Supply and Use of Fuels in Hong Kong, March 1993, Part III, pp. 2.1-2.14.

C43    C. C. Chan and K T Chau: “A Fast Large-Signal Simulation of Pulsewidth-Modulated Power Converters”, Proceedings of IEEE Power Electronics Specialists Conference (PESC'93), Seattle, U.S.A., June 1993,pp. 373-379.

C44    K T Chau, H.C. Chan and C.C. Chan: “A Neural Network Controller for Switching Power Converters”, Proceedings of IEEE Power Electronics Specialists Conference (PESC'93), Seattle, U.S.A., June 1993, pp. 887-892.

C45    C.C. Chan and H.Q. Wang: “A Novel Sliding Mode Control Method for Induction Motor Drives”, Conference Record IEEE Industry Applications Society, October 1993, pp. 739-745.

C46    C.C. Chan and K.T. Chau, “Power Electronics Challenges in Electric Vehicles”, Proceedings of IEEE International Conference on Industrial Electronics, Control and Instrumentation (IECON), Hawaii, USA, November 1993, pp. 701-706.

C47    C.C. Chan, P. Chen, R. Yau, J. Zhu and K.T. Chau, “Analysis of Electromagnetic Forces of Large Turbine Generators”, Proceedings of IEE International Conference on Advances in Power System Control, Operation and Management (APSCOM), Hong Kong, China, December 1993, pp. 305-309.

C48    C.C. Chan, P.Z. Chen, R.P. Yao, J.N. Zhu and K.T. Chau: “Analysis of Electromagnetic Forces of Large Turbo Generators”, Proceedings IEE 2nd International Conference on Advances in Power Systems Control, Operation and Management (APSCOM 93), December 1993, pp. 305-309.

C49    K.T. Chau and C.C. Chan, “Real-time Implementation of An On-line Trained Neural Network Controller for Power Electronics Converters”, Proceedings of IEEE Power Electronics Specialists Conference (PESC), Taiwan, China, June 1994, pp. 321-327.

C50    C.C. Chan: “Overview of Electric Vehicle Development and Potential Applications in China & Southeast Asia”, Proceedings POWER-GEN Asia'94, Hong Kong, China, 23-25 August 1994, Vol. I, pp. 121-130.

C51    C.C. Chan: “Overview of Electrical Energy and its Impacts on Economy and Environment”, Proceedings POWER-GEN Asia 94' Hong Kong, 23–25, Hong Kong, China, August 1994, Vol. II, pp. 173 -184.

C52    A C C Tseung, P K Shen, Y S Fung, K Y Chan, C.C. Chan and W.H. Lam: “Room temperature Ethyl format fuel cells for consumer electronics”, 1994 International Symposium on Consumer Electronics, Hong Kong, China, November, 1994, pp. 1-6.

C53    C.C. Chan, Y.J. Zhan, L Bed, Z.A. Yu and Y.I Araki: “The Development of An Advanced Electric Vehicle U2001”, Proceedings 12th International Electric Vehicle Symposium, California, U.S.A., December 1994, pp. 282-291.

C54    C.C. Chan and E W C Lo: “Visual Servo Control with Artificial Neural Network”,Proceedings IEEE International Conference on Industrial Technology, December 1994, pp. 283-287.

C55    C.C. Chan, J.Z. Jiang and W. Xia: “Novel Wide Range Speed Control of Permanent Magnet Brushless Motor Drives”,Proceedings IEEE International Conference on Power Electronics and Drive System, February 1995, pp. 780-785.

C56    C.C. Chan and Q. Jiang: “Study of Starting Performance of Switched Reluctance Motors”,Proceedings IEEE International Conference on Power Electronics and Drive System, February 1995, pp.174-179.

C57    C.C. Chan and K.T. Chau: “Nonlinear Identification of Power Electronic Systems”,Proceedings IEEE International Conference on Power Electronics and Drive System, February 1995, pp. 329-334.

C58    C.C. Chan and K.T. Chau: “A SPICE Compatible Model of Permanent Magnet DC Motor Drives”, Proceedings IEEE International Conference on Power Electronics and Drive System, February 1995, pp. 477-482.

C59    C.C. Chan, J.Z. Jiang, W. Xia and K.T. Chau, “Novel Wide Range Speed Control of Permanent Magnet Brushless Motor Drives”, Proceedings of International Power Electronics and Drive Systems Conference (PEDS), Singapore, February 1995, pp. 780-785.

C60    C.C. Chan and M.L. Zhu: “Implementation of RealTime Parallel Processing in a Motion Control System”, Proceedings IEEE First International Conference on Algorithms and Architectures for Parallel Processing, April 1995, Vol. 2, pp. 900-903.

C61    C.C. Chan and K.T. Chau: “Electric Vehicles - Challenges and Opportunities”,Proceedings Symposium on Electrochemical Science and Technology, August 1995, pp.1-9.

C62    C.C. Chan and K.T. Chau, “Challenges of Electric Vehicle Technology”, Proceedings of 2nd Chinese International Conference on Electrical Machines (CICEM), Hangzhou, China, August 1995, pp. 34-41.

C63    C.C. Chan, J.Z. Jiang, W. Xia and K.T. Chau: “Simulation and Analysis of a Novel Adjustable-Speed Permanent Magnet Brushless Motor Drive”, Proceedings International ConferenceonElectrical Machines, Hangzhou, China, August 1995, Vol. II, pp.988-993.

C64    C.C. Chan, R. Zhang, K.T. Chau and J.Z. Jiang: “A Novel Permanent Magnet Hybrid Motor for Electric Vehicles”,Proceedings International Conference on Electric Machines, Hangzhou, China, August 1995, Vol. II, pp.618-623.

C65    C.C. Chan and Q. Jiang: “A New Method of Dimension Optimization of Switched Reluctance Motors”, Proceedings International Conference on Electric Machines, Hangzhou, China, August 1995, Vol. II, pp.1004-1009.

C66    C.C. Chan and K.T. Chau: “Overview of Electric Vehicle Technology and Market Potential in China”, Proceedings World Electric Vehicle Association EVT95, Paris November 1995, Vol. 2, pp.293-302.

C67    C.C. Chan: “The State of the Art of EV Technology and EV Development in Mainland China and Hong Kong”, Proceedings 1996 ROC Electric Vehicle International Symposium, February 1996, Taipei, China, pp.E1-E16.

C68    C.C. Chan, J.Z. Jiang, W. Xia, K.T. Chau and M.L. Zhu: “Optimal-Efficiency Control for Constant-Power Operation of Phase-Decoupling Permanent-Magnet Brushless Motor Drive”, Proceedings IEEE-APEC (Applied Power Electronics Conference and Exposition), March 1996, San Jose, USA., pp. 751-757.

C69    K.T. Chau, C.F. Lam and C.C. Chan: “Spectral Modeling of Switched-Mode Power Converters in Discontinuous Conduction Mode”,Proceedings of IEEE Industrial Electronics Society 22nd Annual International Conference (IECON’96), Taipei, Taiwan, China, August 1996, pp. 1017-1022.

C70    K.T. Chau, T.W. Ching and C.C. Chan: “Constant-Frequency Multi-Resonant Converter-fed DC Motor Drives”,Proceedings of IEEE Industrial Electronics Society 22ndAnnualInternational Conference (IECON’96), Taipei, Taiwan, China, August 1996, pp. 78-83.

C71    C.C. Chan and K.T. Chau: “An Overview of Electric Vehicles - Challenges and Opportunities”, Proceedings of IEEE Industrial Electronics Society 22ndAnnual International Conference (IECON’96), Taipei, Taiwan, China, August 1996, pp. 1-6.

C72    C.C. Chan, M. Zhu, J.Z. Jiang, K.T. Chau and W. Xia: “Development of Phase-Decoupling Permanent Magnet Motor Drives for the Propulsion System of Electric Vehicles”,Proceedings of 13th International Electric Vehicle Symposium (EVS-13), Osaka, Japan, October 1996, Vol. I, pp. 776-780.

C73    C.C. Chan, Q. Jiang, Y.J. Zhan and K.T. Chau: “A HighPerformance Switched Reluctance Drive for P-star EV Project”, Proceedings of 13th International Electric Vehicle Symposium (EVS-13), Osaka, Japan, October 1996, Vol. II, pp. 78-83.

C74    C.C. Chan, Y.J. Zhan and K.T. Chau: “Fuzzy Variable Structure Control of Switched Reluctance Motor Drive for EVs”, Proceedings of 13th International Electric Vehicle Symposium (EVS-13), Osaka, Japan, October 1996, Vol. II, pp. 573-578.

C75    C.C. Chan, R. Zhang, K.T. Chau and J.Z. Jiang: “A Novel Brushless PM Hybrid Motor with a Claw-type Rotor Topology for Electric Vehicles”, Proceedings of 13th International Electric Vehicle Symposium (EVS-13), Osaka, Japan, October 1996, Vol. II, pp. 579-584.

C76    C.C. Chan and K.T. Chau: “Review on Modern Drive Technology for Electric Vehicles”, IEEE Symposium on Industrial Drives and Traction (SIDT’96), Hong Kong, China, November 1996, pp. 3-14.

C77    C.C. Chan: “Electric Vehicle Development Strategy and Key Technology”, Proceedings 1997 ROC Electric Vehicle Technology Development International Symposium, Ministry of Economic Affairs, February 1997, Taipei, China, pp. 1-11.

C78    C.C. Chan, K.T. Chau and Y. Li: “A Novel Dead-time Vector Approach to Analysis of DC Link Current in PWM Inverter Drives”, Proceedings of IEEE Applied Power Electronics Conference and Exposition (APEC’97), Atlanta, USA, February 1997, pp.338-344.

C79    C.C. Chan, K.T. Chau, Y. Li and D.T.W. Chan: “A Unified Analysis of DC Link Current in Space-Vector PWM Drives”, Proceedings of IEEE Power Electronics and Drive Systems Conference (PEDS’97), Singapore, May 1997, pp. 762-768.

C80    C.C. Chan, K.T. Chau, J.M. Yao and D.T.W. Chan: “A Novel Soft-Switching Inverter Using Resonant Inductor Freewheeling”, Proceedings of IEEE Power Electronics and Drive Systems Conference (PEDS’97), Singapore, May 1997, pp. 215-221.

C81    K.T. Chau, J.H. Chen, C.C. Chan, J.K.H. Pong and D.T.W. Chan: “Chaotic Behaviour in a Simple DC Drive”,Proceedings of IEEE Power Electronics and Drive Systems Conference (PEDS’97), Singapore, May 1997, pp. 473-479.

C82    C.C. Chan, R. Zhang, K.T. Chau and J.Z. Jiang: “Optimal Efficiency Control of PM Hybrid Motor Drives for Electrical Vehicle”, Proceedings of IEEE Power Electronics Specialists Conference (PESC’97), St. Louis, USA, June 1997, pp. 363-368.

C83    K.T. Chau, J.H. Chen and C.C. Chan: “Dynamic Bifurcation in DC Drives”, Proceedings of IEEE Power Electronics Specialists Conference (PESC’97), St. Louis, USA, June 1997, pp. 1330-1336.

C84    C.C. Chan, K.T. Chau and J.M. Yao: “Soft-Switching Vector Control for Resonant Snubber Based Inverters”, Proceedings of the IEEE Industrial Electronics Society 23rd International Conference (IECON 97), November 1997, pp. 453-457.

C85    K.T. Chau, C.C. Chan and J.M. Yao: “Nonlinear Modeling and Spectral Analysis of Cuk Converters”, Proceedings IEEE Industrial Electronics Society 23rd International Conference (IECON 97), November 1997, pp. 605-610.

C86    K.T. Chau, T.W. Ching, C.C. Chan and D.T.W. Chan: “A Novel Two-Quadrant Zero-Voltage Transition Converter for DC Motor Drives”, Proceedings IEEE Industrial Electronics Society 23rd International Conference (IECON 97), November 1997, pp. 517-522.

C87    K. T. Chau, J.H. Chan, C.C. Chan and T.W. Chan: “Modeling of Subharmonics and Chaos in DC Motor Drives”,Proceedings IEEE Industrial Electronics Society 23rd International Conference (IECON 97), November 1997, pp. 523-528.

C88    C.C. Chan and K.T. Chau: “Power Electronics and Electric Vehicles”, Proceedings of International Conference on Power Electronics and Motion Control (IPEMC), Hangzhou, China, November 1997, pp. 21-28.

C89    C.C. Chan, K.T. Chau, D.T.W. Chan and J.M. Yao: “Soft Switching Inverters in Electric Vehicles”, Proceedings of 14th International Electric Vehicle Symposium (EVS-14), Orlando, USA, December 1997, Paper No. 2B-3, pp. 1-10.

C90    K.T. Chau, T.W. Ching and C.C. Chan: “Bidirectional Soft-Switching Converter-Fed DC MotorDrives”, Proceedings of IEEE Power Electronics Specialists Conference (PESC’98), Fukuoka, Japan, May 1998, pp. 416-422.

C91    K.T. Chau, T.W. Ching and C.C. Chan: “A New Zero-Voltage-Transition Converter for Switched Reluctance Motor Drives”, Proceedings of IEEE Power Electronics Specialists Conference (PESC’98), Fukuoka, Japan, May 1998, pp. 1295-1301.

C92    Y.J. Zhan, C.C. Chanand K.T. Chau: “A Novel Position and Velocity Observer for Robust Control of Switched Reluctance Motors”, Proceedings of IEEE Power Electronics Specialists Conference (PESC’98), Fukuoka, Japan, May 1998, pp. 1315-1321.

C93    C.C. Chan, Y.J. Zhan and K.T. Chau: “Stability Analysis of Fuzzy Sliding Mode Controlled Switched Reluctance Motor Drives”, Proceedings of IEEE Power Electronics Specialists Conference (PESC’98), Fukuoka, Japan, May 1998, pp. 1283-1289.

C94    C.C. Chan, K.T. Chau, D.T.W. Chan, J.M. Yao, J.S. Lai, and Y. Li: “Switching Characteristics and Efficiency Improvement with Auxiliary Resonant Snubber Based Soft-switching Inverters”, Proceedings of IEEE Power Electronics Specialists Conference (PESC’98), Fukuoka, Japan, May 1998, pp. 429-435.

C95    C.C.Chan: “Electric Vehicle Development Strategy and Key Technology”, Proceedings of General Assembly of Chinese Academy of Engineering and Chinese Academy of Science, Beijing, China, June 1998, pp. 351-362.

C96    C.C. Chan, Y.J. Zhan, K.T. Chau and S.W. Chung: “Fuzzy Sliding Mode Control of Switched Reluctance Motor Drives Using Fuzzy Sliding Mode Observer”, Proceedings of 3rd International Conference on Advanced Mechatronics (ICAM’98), Okayama, Japan, August 1998, pp. 572-577.

C97    S.W. Chung, K.T. Chau and C.C. Chan: “Neuro-Fuzzy Control of Ultrasonic Motors”, Proceedings of 3rd International Conference on Advanced Mechatronics (ICAM’98), Okayama, Japan, August 1998, pp. 590-595.

C98    T.W. Ching, K.T. Chau and C.C. Chan: “A Novel Two-Quadrant Zero-Current Transition Converter for DC Motor Drives”, Proceedings of IEEE Industrial Electronics Society Annual International Conference (IECON’98), Aachen, Germany, August 1998, pp.715-720.

C99    T.W. Ching, K.T. Chau and C.C. Chan:“A Novel Zero-Voltage Soft Switching Converter for Switched Reluctance Motor Drives”, Proceedings of IEEE Industrial Electronics Society Annual International Conference (IECON’98), Aachen, Germany, August 1998, pp.893-898.

C100    K.T. Chau, T.W. Ching, C.C. Chan and M.S.W. Chan: “A Novel Zero-Current Soft-Switching Converter for Switched Reluctance Motor Drives”, Proceedings of IEEE Industrial Electronics Society Annual International Conference (IECON’98), Aachen, Germany, August 1998, pp.899-904.

C101    K.T. Chau, T.W. Ching, C.C. Chan and M.S.W. Chan: “A Novel Zero-Current Soft-Switching Converter for Switched Reluctance Motor Drives”, Proceedings of IEEE Industrial Electronics Society Annual International Conference (IECON’98), Aachen, Germany, August 1998, pp.899-904.

C102    M.S.W. Chan, K.T. Chau and C.C. Chan: “Modeling of Electric Vehicle Chargers”, Proceedings of IEEE Industrial Electronics Society Annual International Conference (IECON’98), Aachen, Germany, August 1998, pp. 433-438.

C103    Y.S. Wong, K.T. Chau and C.C. Chan: “A Mixed-Signal Electric Vehicle Simulator”, Proceedings of 15th International Electric Vehicle Symposium (EVS-15), Brussels, Belgium, October 1998, Paper No. 9-1, pp. 1-10.

C104    D.T.W. Chan, C.C. Chan and K.T. Chau: “EV Oriented Design and Specification of Power Converters in Electric Vehicles”, Proceedings of 15th International Electric Vehicle Symposium (EVS-15), Brussels, Belgium, October 1998, Paper No. 3-11, pp. 1-10.

C105    C.C. Chan, K.T. Chau and S.W. Chan: “Impact of Electric Vehicles to Power System”, Proceedings of 15th International Electric Vehicle Symposium (EVS-15), Brussels, Belgium, October 1998, Paper No. 5D-2, pp. 1-10.

C106    2-EV K.T. Chau and C.C. Chan: “Engineering Education on Electric Vehicle Technology”, Proceedings of 15th International Electric Vehicle Symposium (EVS-15), Brussels, Belgium, October 1998, Paper No. 13-3, pp. 1-10.

C107    J. Gan, C.C. Chan, K.T. Chau and J.Z. Jiang: “Advanced Conduction Angle Control of Permanent Magnet Brushless Motor Drives”, Proceedings of IEEE International Conference on Power Electronics Drives and Energy Systems for Industrial Growth (PEDES’98), Perth, Australia, November 1998, pp.552-557.

C108    M. Cheng, K.T. Chau and C.C. Chan: “A New Doubly Salient Permanent Magnet Motor”,Proceedings of IEEE International Conference on Power Electronics Drives and Energy Systems for Industrial Growth (PEDES’98), Perth, Australia, November 1998, pp. 2-7.

C109    M. Cheng, K.T. Chau and C.C. Chan: “Static Characteristics of a New Doubly Salient Permanent Magnet Motor”, Proceedings of IEEE International Electric Machines and Drives Conference (IEMDC’99), Seattle, USA, May 1999, pp.22-24.

C110    K.T. Chau, J.H. Chen, C.C. Chan and Q. Jiang: “Subharmonics and Chaos in Switched Reluctance Motor Drives”, Proceedings of IEEE International Electric Machines and Drives Conference (IEMDC’99), Seattle, USA, May 1999, pp.661-663.

C111    S.W. Chung, K.T. Chau and C.C. Chan: “Neuro-Fuzzy Dual-Mode Control of Travelling-Wave Ultrasonic Motors”, Proceedings of IEEE International Electric Machines and Drives Conference (IEMDC’99), Seattle, USA, May 1999, pp.598-600.

C112    C.C.Chan: “An Overview of Electric Vehicle Propulsion Control Strategy”, Proceedings of the 14th World Congress of International Federation of Automation Control, July 1999.

C113    C.C. Chan, M. Cheng, K.T. Chau and E. Zhou: “A New Doubly Salient Permanent Magnet Motor with Wide Constant Power Operating Range”, Proceedings of Chinese International Conference on Electrical Machines (CICEM’99), Xian, China, August 1999, pp. 171-174.

C114    C.C. Chan, S.Z. Jiang, K.T. Chau and J.Z. Jiang:“Design of Pole-Changing Induction Motor Drive Systems for Electric Vehicles”, Proceedings of Chinese International Conference on Electrical Machines (CICEM’99), Xian, China, August 1999, pp. 704-707

C115    J. Gan, K.T. Chau, C.C. Chan and J.Z. Jiang: “A Novel Polyphase Surface Inset Permanent Magnet Motor with Complex Characteristics”, Proceedings of Chinese International Conference on Electrical Machines (CICEM’99), Xian, China, August 1999, pp. 183-186.

C116    J. Gan, K.T. Chau, C.C. Chan and J.Z. Jiang: “A Novel Polyphase Surface Inset Permanent Magnet Motor with Complex Characteristics”, Proceedings of Chinese International Conference on Electrical Machines (CICEM), Xian, China, August 1999, pp. 183-186.

C117    E. Zhou, M. Cheng, X. Huang, Q. Sun, K.T. Chau and C.C. Chan: “Nonlinear Varying-Network Magnetic Circuit Analysis for New Doubly Salient Permanent Magnet Motors”, Proceedings of Chinese International Conference on Electrical Machines (CICEM), Xian, China, August 1999, pp. 519-522.

C118    C.C. Chan, S.Z. Jiang, K.T. Chau and J.Z. Jiang: “Design of Pole-Changing Induction Motor Drive Systems For Electric Vehicles”, Proceedings of Chinese International Conference on Electrical Machines (CICEM), Xian, China, August 1999, pp. 704-707.

C119    C.C. Chan, J. Gan, K.T. Chau: “A New Surface-Inset Permanent Magnet Motor Drive for Electric Vehicles”, Proceedings of 16th International Electric Vehicle Symposium (EVS-16), Beijing, China, October 1999, No. C1-2, pp. 1-10.

C120    K.T. Chau, M. Cheng and C.C. Chan: “A New Doubly Salient Permanent Magnet Motor for Electric Vehicles”, Proceedings of 16th International Electric Vehicle Symposium (EVS-16), Beijing, China, October 1999, No. C1-3, pp. 1-10.

C121    Y.S. Wong, K.T. Chau and C.C. Chan: “Hybridisation of Energy Sources in Electric Vehicles”, Proceedings of 16th International Electric Vehicle Symposium (EVS-16), Beijing, China, October 1999, No. 4-1, pp. 1-10.

C122    Q. Jiang, C.C. Chan, and K.T. Chau: “An Overview of Advanced Navigation Systems for EVs”, Proceedings of 16th International Electric Vehicle Symposium (EVS-16), Beijing, China, October 1999, No. 5-13, pp. 1-11.

C123    D.T.W. Chan, C.C. Chan, and K.T. Chau: “System Level Simulation of Electric Vehicles Using Universal Driving Cycle”, Proceedings of 16th International Electric Vehicle Symposium (EVS-16), Beijing, China, October 1999, No. 5-17, pp. 1-11.

C124    M.S.W. Chan, K.T. Chau and C.C. Chan: “Coordination of Charging Stations for Electric Vehicles”, Proceedings of 16th International Electric Vehicle Symposium (EVS-16), Beijing, China, October 1999, No. 6-1, pp. 1-10.

C125    J.H. Chen, K.T. Chau, Q. Jiang and C.C. Chan: “Modeling and Analysis of Chaotic Behavior in Switched Reluctance Motor Drives”, Proceedings of IEEE Power Electronics Specialists Conference (PESC), Galway, Ireland, June 2000, No. 39-4, pp. 1-6.

C126    K.T. Chau, S.Z. Jiang and C.C. Chan: “Reduction of Current Ripple and Acoustic Noise in Dual-inverter Pole-changing Induction Motor Drives”, Proceedings of IEEE Power Electronics Specialists Conference (PESC), Galway, Ireland, June 2000, No. 4-2, pp. 1-6.

C127    K.T. Chau, M.S.W. Chan, and C.C. Chan: “Current Demand Minimization by Centralized Charging Coordination”, Proceedings of 17th International Electric Vehicle Symposium (EVS-17), Montréal, Canada, October 2000, CD-ROM.

C128    Y.S. Wong, K.T. Chau and C.C. Chan: “Optimization of Energy Hybridization in Electric Vehicles”, Proceedings of 17th International Electric Vehicle Symposium (EVS-17), Montréal, Canada, October 2000, CD-ROM, pp. 1-12.

C129    C.C. Chan: “Electric Vehicles : ‘A Clean and Efficient Urban Alternative Transportation for the 21st Century’ ”, Proceedings International Congress on Engineering and Technology Sciences 2000 (ICETS2000), Energy Session, pp. 430-437.

C130    2-EV C.C. Chan, Y.S. Wong and K.T. Chau: “Electric Vehicle Optimization by System Level Simulation”, Proceedings of 18th International Electric Vehicle Symposium (EVS-18), Berlin, Germany, October 2001, CD-ROM, pp. 1-11.

C131    Y. Wang, K.T. Chau, C.C. Chan and J.Z. Jiang: “Transient Analysis of a New outer-rotor Permanent-magnet Brushless DC Drive Using Circuit-field-torque Time-stepping Finite Element Method”, Proceedings of 13th Conference on Computation of Electromagnetic Fields (Compumag), Lyon-Evian, France, July 2001, Vol. IV, pp. 68-69.

C132    M. Cheng, K.T. Chau and C.C. Chan: “Design and Analysis of a New 12/8-pole Doubly Salient Permanent-magnet Machine”, Proceedings of 13th Conference on Computation of Electromagnetic Fields (Compumag), Lyon-Evian, France, July 2001, Vol. I, pp. 166-167.

C133    K.T. Chau, M.S.W. Chan and C.C. Chan: “Current Demand Minimization by Centralized Charging Coordination”, Proceedings of 17th International Electric Vehicle Symposium (EVS-17), Montréal, Canada, October 2000, CD-ROM, pp. 1-12.

C134    Y.S. Wong, K.T. Chau and C.C. Chan: “Optimization of Energy Hybridization in Electric Vehicles”, Proceedings of 17th International Electric Vehicle Symposium (EVS-17), Montréal, Canada, October 2000, CD-ROM, pp. 1-12.

C135    Y.S. Wong, K.T. Chau and C.C. Chan: “Optimization of Energy Management System in Energy Hybridizations”, Proceedings of 18th International Electric Vehicle Symposium (EVS-18), Berlin, Germany, October 2001, CD-ROM, pp. 1-10.

C136    K.T. Chau, M.S.W. Chan and C.C. Chan: “Harmonic Reduction by Charging Coordination”, Proceedings of 18th International Electric Vehicle Symposium (EVS-18), Berlin, Germany, October 2001, CD-ROM, pp. 1-12.

C137    K.T. Chau, M. Cheng and C.C. Chan: “Nonlinear Magnetic Circuit Analysis for a Novel Stator-doubly-fed Doubly-salient Machine”, Proceedings of IEEE International Magnetics Conference (Intermag), Amsterdam, The Netherlands, April 2002, Paper No. AU05.

C138    Y. Wang, K.T. Chau, C.C. Chan and J.Z. Jiang: “Design and Analysis of a New Multiphase Polygonal-winding Permanent-magnet Brushless DC Machine”, Proceedings of IEEE International Magnetics Conference (Intermag), Amsterdam, The Netherlands, April 2002, Paper No. GU04.

C139    M. Cheng, K.T. Chau and C.C. Chan: “Control and Operation of a New 8/6-pole Split-winding Doubly Salient Permanent Magnet Motor Drive”,Proceedings of IEEE Industry Applications Society Annual Meeting (IAS), Pittsburgh, USA, October 2002, pp. 126-133.

C140    K.T. Chau, M.S.W. Chan and C.C. Chan: “Hardware Implementation of Charging Coordination for Electric Vehicles to Reduce Maximum Current Demand”,Proceedings of 19th International Electric Vehicle Symposium (EVS-19), Busan, Korea, October 2002, CD-ROM.

C141    K.C. Wu, K.T. Chau, C.C. Chan and W.X. Shen: “A New Battery Residual Capacity Indicator for Electric Vehicles UsingAdaptive Neural Fuzzy Inference System”,Proceedings of 19th International Electric Vehicle Symposium (EVS-19), Busan, Korea, October 2002, CD-ROM.

C142    C.C. Chan, Y.S. Wong and K.T. Chau: “Optimal Design of Hybrid Fuel Cell Electric Vehicles”,Proceedings of 19th International Electric Vehicle Symposium (EVS-19), Busan, Korea, October 2002, CD-ROM.

C143    S.W. Chung, K.T. Chau and C.C. Chan: “Self-locking Torque Control of Traveling-wave Ultrasonic Motors”,Proceedings of International Conference on Electrical Engineering, (ICEE), Hong Kong, China, July 2003, CD-ROM.

C144    Y.S. Wong, K.T. Chau, M.S.W. Chan and C.C. Chan: “Cost Analysis for Implementation of Electric Vehicles in Hong Kong”,Proceedings of 20th International Electric Vehicle Symposium (EVS-20), California, USA, November 2003, CD-ROM, pp. 1-9.

C145    K.T. Chau, M.S.W. Chan and C.C. Chan: “Lithium Ion Battery Model”,Proceedings of 20th International Electric Vehicle Symposium (EVS-20), California, USA, November 2003, CD-ROM, pp. 1-10.

C146    C.C. Chan and Y.S Wong: “The State of the Art of Electric Vehicles Technology”,q The 4th International Power Electronics and Motion Control Conference (IPEMC), 2004. Volume 1, pp. 46 -57.

C147    Y.S. Wong, C.C. Chan, M.S.W. Chan and T.W. Ching: “ Maximization of Economic Benefits of Electric and Hybrid Vehicles”, Proceedings of 21st International Electric Vehicle Symposium (EVS-21), Monaco, April 2 -6, 2005, CD-ROM.

C148    C.C. Chan, Heliang Zhou and Liqing Sun: “Recent Progess of Electric Vehicles in China Along with Worldwide Trends”, Proceedings of 21st International Electric Vehicle Symposium (EVS-21), Monaco, April 2 -6, 2005, CD-ROM.

C149    M.S.W. Chan, C.C. Chan and K.T. Chau: “Low-Cost Hardware Implementation of Lithium-ion Battery Capacity Indicator”, Proceedings of 21st International Electric Vehicle Symposium (EVS-21), Monaco, April 2 -6, 2005, CD-ROM.

C150    Hui Zhang, Kaipe Liu, Michael Braun, C.C. Chan: “Selective Harmonic Controlling for Three-level High Power Active Front End Converter with Low Switching Frequency”, CES/IEEE 5th International Power Electronics and Motion Control Conference, August 14-16, 2006, Shanghai, China, CD-ROM.

C151    C.C Chan: “Energy Development Strategy, Industrial Ecology and Challenges to Electric Machines Systems”, Proceedings of the Eighth International Conference on Electrical Machines and Systems (ICEMS), September 27-29, 2005, pp. 12- 17.

C152    Z.F. Zhu, K.C. Li, C.C.Chan, and J. Huang: “The Research of the BMRM Polyphase Distribution Winding”, Proceedings of the Eighth International Conference onElectrical Machines and Systems (ICEMS), September 27-29, 2005, pp. 671 -674.

C153    M.S.W. Chan, K.T. Chau and C.C. Chan, “Effective Charging Method for Ultracapacitor,” Proceedings of Asian Electric Vehicle Conference (AEVC), Osaka, Japan, November 2005, Paper No. 2

C154    Y.S. Wong, K.T. Chau and C.C. Chan, “Load Forecasting of Hybrid Electric Vehicles under Real Time Pricing,” Proceedings of Asian Electric Vehicle Conference (AEVC), Osaka, Japan, November 2005, Paper No. 23

C155    Shumei Cui, Yuan Cheng and C.C. Chan: “A Basic Study of Electrical Variable Transmission and Its Application in Hybrid Electric Vehicles”, Proceedings of IEEE Vehicle Power and Propulsion Conference, September 6-8, 2006, Windsor, U.K. Paper No.SNO-143. CD ROM.

C156    C.C.Chan: “Outlook of Automobile Industry and EV Commercialization in China”, Proceedings of 22nd International Electric Vehicle Symposium (EVS-22), Yokohama, October 25-28, 2006, CD-ROM.

C157    L.Q. Sun and C.C. Chan: “System Integration and Key Components of Electric Vehicles in China”, 22nd International Electric Vehicle Symposium (EVS-22), Yokohama, October 25-28, 2006, CD-ROM.

C158    S.W. Chan, K.T. Chau and C.C. Chan: “A Dedicated Charger for Hybrid Energy Systems with Ultracapacitors and Lithium Polymer Batteries”, 22nd International Electric Vehicle Symposium (EVS-22), Yokohama, October 25-28, 2006, CD-ROM.

C159    Y.S. Wong, K.T. Chau and C.C. Chan: “Battery Evaluation and Sizing for Plug-In Hybrid Electric Vehicles”, 22nd International Electric Vehicle Symposium (EVS-22), Yokohama, October 25-28, 2006, CD-ROM.

C160    C.C. Chan, Liqing Sun, Ruchuan Liang, and Qingcai Wang: “Current Status and Future Trends of Energy Storage Systems for Electric Vehicles”, 23rd International Electric Vehicle Symposium (EVS-23), Anaheim, California, U.S.A. December 2 – 5, 2007, CD-ROM.

C161    Chuang Yu, K.T. Chau and C.C. Chan: “Thermoelectric Waste Heat Energy Recovery for Hybrid Electric Vehicles”, 23rd International Electric Vehicle Symposium (EVS-23), Anaheim, California, U.S.A. December 2 – 5, 2007, CD-ROM.

C162    Li Zhu, S.Z. Jiang, Z.Q. Zhu, and C.C. Chan: “Comparison of Alternate Analytical Model for Cogging Torque in Surface-Mounted Permanent Magnet Machines”, Proceedings of IEEE Vehicle Power and Propulsion Conference, September 3-5, 2008, Harbin, China, CD ROM.

C163    Chunlai Yu, Chunbo Zhu, and C.C. Chan: “Research on the Topology of Wireless Energy Transmission Device”, Proceedings of IEEE Vehicle Power and Propulsion Conference, September 3-5, 2008, Harbin, China, CD ROM.

C164    Yuan Cheng, Keyu Chen, and C.C. Chan: “Global Modeling and Control Strategy Simulation for a Hybrid Electric Vehicle Using Electrical Variable Transmission”, Proceedings of IEEE Vehicle Power and Propulsion Conference, September 3-5, 2008, Harbin, China, CD ROM.

C165    C.C. Chan: “Philosophy of Engineering and Challenges of Engineering Education”, Proceedings of IEEE Vehicle Power and Propulsion Conference, September 3-5, 2008, Harbin, China, CD ROM.

C166    Liqing Sun and C.C. Chan: “State-of-art of Energy System for New Energy Vehicles”, Proceedings of IEEE Vehicle Power and Propulsion Conference, September 3-5, 2008, Harbin, China, CD ROM.

C167    Danhong Zhang, Yan Zhou, C.C. Chan, and Kaipei Liu: “A Study on Fuzzy Control of Energy Management System in Hybrid Electric Vehicle”, Proceedings of IEEE Vehicle Power and Propulsion Conference, September 3-5, 2008, Harbin, China, CD ROM.

C168    Xiaodong Zhang, K.T. Chau and C.C. Chan: “An Optimal Solar-thermoelectric Hybrid Energy System for Hybrid Electric Vehicles”, Proceedings of IEEE Vehicle Power and Propulsion Conference, September 3-5, 2008, Harbin, China, CD ROM.

C169    X. Zhang, K.T. Chau, C. Yu and C.C. Chan “An optimal solar-thermoelectric hybrid energy system for hybrid electric vehicles,” Proceedings of IEEE Vehicle Power and Propulsion Conference (VPPC), Harbin, China, September 2008, paper no. H08307, pp. 1-6.

C170    Li Zhu, S. Z. Jiang, Z. Q. Zhu and C. C. Chan, “Analysis and modeling of open-circuit airgap field distributions in multi-segment and multilayer interior permanent magnet machines”, Proceeding of IEEE

Vehicle Power and Propulsion Conference (VPPC), pp. 326, Harbin,September 3-5 2008.

C171    X. Zhang, K.T. Chau and C.C. Chan, “Design and implementation of a thermoelectric-photovoltaic hybrid energy source for hybrid electric vehicles,” Proceedings of 24th International Electric Vehicle Symposium (EVS-24), Stavanger, Norway, May 2009, paper no. 2130104, pp. 1-10.

C172    X. Zhang, K.T. Chau, C.C. Chan and S. Gao, “An automotive thermoelectric-photovoltaic hybrid energy system,” Proceedings of IEEE Vehicle Power and Propulsion Conference (VPPC), Lille, France, September 2010, paper no. 95-26487.

C173    S. Gao, K.T. Chau, C.C. Chan and D. Wu, “Loss analysis of vehicle-to-grid operation,” Proceedings of IEEE Vehicle Power and Propulsion Conference (VPPC), Lille, France, September 2010, pp. 1-6.

C174    X. Zhang, K.T. Chau and C.C. Chan, “A multi-hybrid energy system for hybrid electric vehicles,” Proceedings of 25th International Electric Vehicle Symposium (EVS-25), Shenzhen, China, November 2010, paper no. K5OL3L10.

C175    S. Gao, K.T. Chau, C.C. Chan and D. Wu, “Modeling, evaluation and optimization of vehicle-to-grid operation,” Proceedings of 25th International Electric Vehicle Symposium (EVS-25), Shenzhen, China, November 2010, CD-ROM.

C176    S. Gao, K.T. Chau, C.C. Chan and D. Wu, “Modeling and optimization of Electric vehicles integrated into grid,” Proceedings of International Conference on Electrical Engineering (ICEE), Hong Kong, July 2011.

T1    C.C. Chan: “Measurement of Road Traffic Noise and Evaluation of Its Reduction by Using Electric Vehicles in Hong Kong”, Consultancy Report, China Light & Power Co. Ltd., Hong Kong, China, June 1991.

T2    C.C. Chan: “Energy Saving and Dioxide Emission Reduction by Electric Vehicles in Hong Kong”, Consultancy Report, China Light & Power Co. Ltd., Hong Kong, China, December 1991.

T3    C.C. Chan and K.T. Chau: “Battery Chargers and Battery State-of-Charger Indicators”, Industrial Report, Ford Science Laboratories, USA, March 1993.

T4    C.C. Chan and K.T. Chau: “EV Propulsion Systems”, Industrial Report, Ford Science Laboratories, USA, July 1993.

T5    C.C. Chan, K.T. Chau, J.Z. Jiang and J.Y. Gan: “Analysis of Electric Drive Systems for Electric Motorcycles”, Consultancy Report, Kwang Yang Motor Company Limited, Taiwan, China, August 1997.

T6    C.C. Chan, K.T. Chau and Y.S. Wang: “Electric Vehicles for Public Light Buses”, Technical Report, Hong Kong Electric Company Limited, Hong Kong, China, April 1998.

T7    C.C. Chan, E.W. C. Lo and L. W. Jiao: “Impact of Electric Vehicles on Power System”, Technical Report, Hong Kong Electric Company Limited, Hong Kong, China, December 1998.